Refractory material grade 1-3mm fused Al2O3 white emery sand
1.white emery sand
white emery sand is produced by fusing calcined alumina in an electric arc furnace under carefully controlled conditions. The material produced is white in color, dense and has predominantly large crystals of Alpha Alumina. Ingots are crushed, ground, and precision screened in our new sizing plant to obtain very consistent sized fractions. Magnetic iron from crushing is removed by rare earth magnets to ensure very low levels of iron in the finished products. Close sized fractions are available or precision blended to specification. This process ensures a very consistent sizing from coarse to fines which is critical in many applications.
2.white emery sand Features
white fused alumina grit slightly higher than the brown fused alumina , toughness slightly, with its abrasive made for grinding high-carbon steel, high-speed steel and stainless steel fine-grained abrasive. Can also be used for precision casting and high-level refractory material.
3.Chemical and physical data for white emery sand
Model : white fused alumina grit 1-3mm | ||||
Items | unit | index | ||
Chemical composition
| Al2O3 | % | 99.60min | |
SiO2 | % | 0.04max | ||
Fe2O3 | % | 0.03max | ||
Na2O+K2O | % | 0.30max | ||
Melting point | 2250 | |||
Refractoriness | 1850 | |||
Bulk density | g/cm3 | 1.75-1.95min | ||
Real density | g/cm3 | 3.95-3.97g/cm3 | ||
Grain sizes | mm | 8-5mm, 5-3mm , 3-1mm ,0-1mm | ||
content of magnetic substance | % | 0.038max |
5.Performance and advantages
1. Not affecting the color of the processing cases;
2. Sandblasting in the non-iron process;
3. High speed processing and quality;
4.Containing a very low amount of iron oxide, suitable for non-ferrous blasting operations
6.Relational productions: